Print - AMX Color Active-Matrix LCD Instruction Manual

Note
You can reset the password
number with the PAGE
PASSWORD button in the
Protected Setup page.
Figure 133
Transfer decision box
Figure 134
Start or quit decision box
Color Active-Matrix LCD Mini-Touch Panels
ENTER Sets the page flip to the new page.
Press the new button to open the page password keypad.
Type 1988 (system default), or your personal page password, and press ENTER to
flip to the new page.
CLEAR Clears the keypad number.
ENTER Sets the page password number, closes the keypad, and flips to the
new password-protected page. The password-protected page will not open if
you enter the wrong password.

Print

Press the PRINT option to open a decision box and send a printable image of the
current page to a PC via the AXlink or 4-pin header on the mini-touch panel. The PC
must be running the or TPDesign software programs before you send the print file.
Refer to TPDOC or TPDesign instruction manuals for more information.
PRESS YES FOR BUS
YES
TRANSFER. PRESS NO
FOR RS232 (9 PIN D).
YES Receives the PC file over the mini-XLR or AXlink connector on the
mini-touch panel, and opens the decision box in Figure 128.
NO Receives the PC file over the 4-pin header on the UniMount and rack-
mount mini-touch panels, and opens the decision box in Figure 134.
PRESS YES TO START.
YES
PRESS NO TO QUIT.
YES Sends the print file to the PC. The mini-touch panel returns to the page
assigned as the startup page when the file transfer is complete.
NO Cancels the file transfer and returns to the current page.
NO
NO
Mini-Touch Panel Program Reference 89