AMX Color Active-Matrix LCD Instruction Manual page 16

Figure 7
Mini-touch panel and BB-MTP
cutout dimensions
Note
The BB-MTP can also be
mounted to wood or metal
studs using the pre-drilled stud
mounting holes.
8 Installing Mini-Touch Panels
Lay the mini-touch panel facedown onto a soft cloth and remove the four screws
3.
from the low profile back box. Remove the back box and discard.
Place the BB-MTP into the cutout and mark the threaded insert positions as
4.
shown in Figure 7.
Remove the BB-MTP and drill eight holes as shown in Figure 7. Then, place #6-
5.
32 threaded inserts into the four holes marked ' B' in the cutout dimensions
illustration.
Disconnect the AXlink connector from the AMX Control System, and the
6.
optional video wiring from the video source.
Remove one or more knockouts to accommodate the wiring as required.
7.
Thread the incoming AXlink and video wiring through the BB-MTP knockout.
8.
Color Active-Matrix LCD Mini-Touch Panels