AMX Color Active-Matrix LCD Instruction Manual page 14

Figure 5
AXU-MCA (/PB), AXU-MCV
(/PB), and low profile back box
cutout dimensions
6 Installing Mini-Touch Panels
Make a cutout in the surface according to the dimensions shown in Figure 5 for
1.
a low profile back box.
Insert a flat-blade screwdriver into the release slot on the mini-touch panel's
2.
bezel and remove the engraved overlay.
Place the mini-touch panel into the cutout and mark the screw insert positions
3.
as shown in Figure 5.
Remove the mini-touch panel and drill four #6-32 insert holes. Then, place a
4.
threaded insert into each hole.
Attach the AXlink and optional RCA video connectors to the mini-touch panel.
5.
Refer to Wiring the Mini-Touch Panels for wiring diagrams and pinout
descriptions.
Color Active-Matrix LCD Mini-Touch Panels