Wave - AMX Color Active-Matrix LCD Instruction Manual

Note
The optional WAV-PKM Mini-
WavePack can only be used
with a TiltScreen mini-touch
panel.
Figure 81
WAVE page
Color Active-Matrix LCD Mini-Touch Panels
SLEEP TIME Press the up and down buttons to set the sleep time. The
minimum sleep time is 0 (off) and maximum is 150 minutes. When the mini-
touch panel goes to sleep, all communication stops and battery discharge is
minimized. If the sleep time is set to 5, the panel goes into sleep mode if there
is no activity for 5 minutes. The mini-touch panel will wake up when you
touch the screen.
BATTERY CHARGING/BATTERY FULLY CHARGED
appears when the lead-acid battery is charging. Battery Fully Charged appears
when the battery is fully charged. The shaded area in the horizontal gauge
moves from left-to-right as the battery voltage level increases.
RF ON/RF OFF
IR 38 kHz/IR 455 kHz/IR OFF
kHz, or off.

WAVE

The WAVE button appears on the Setup page when a WAV-PKM Mini-WavePack is
connected to a TiltScreen mini-touch panel. The WAV-PKM provides wireless two-
way RF spread-spectrum touch panel control. The WAV-PKM contains a lead-acid
rechargeable battery that supplies independent power to the mini-touch panel. Refer
to the AXR-WAVES Server and Wireless Power Packs instruction manual for more
information. Press the WAVE button to open the page shown in Figure 81.
ADJUST WAVE SETTINGS
GROUP ID
WAV-PKM
MODULE
1
LOCKED ON
UP DN
MODULE
RSSI RSSI
VERSION
vX.XX
BATTERY
BATTERY
VOLTAGE
CHARGING
XX.XV
SUPPLY DEVICE
VOLTAGE EFFICIENCY
XX.XV XX%
SERVER DEVICES
128, 129, 130
Press to set RF control signals on or off.
Press to set IR control signals to 38 kHz, 455
EXIT
SLEEP TIME
1
UP DN
SERVER
VERSION
VX.XX
DEVICE
RANGE
XXX-XXX
NETWORK
EFFICIENCY
XX%
Mini-Touch Panel Program Reference
Battery Charging
55