Timer Brt; Editor Bar - AMX Color Active-Matrix LCD Instruction Manual

Figure 104
Timer BRT buttons
Figure 105
Editor bar flowchart
Figure 106
EDITOR button in the
Protected Setup page
72 Mini-Touch Panel Program Reference

Timer BRT

Press the TIMER BRT button to set the brightness level for the LCD Timer Message
Options. When the mini-touch panel goes into sleep mode, the TIMER BRT level sets
how bright the message appears. The minimum settings is 0 (off) and the maximum
is 4.
TIMER BRT
4
UP DN

Editor Bar

Press the EDITOR button in the Protected Setup page to activate the editor bar. The
Protected Setup page remains open until you press EXIT. Then, the editor bar
appears on every page. The flowchart in Figure 105 shows the sequence to activate
the editor bar.
MAIN
SETUP
PAGE
When you press the EXIT button in the Protected Setup page ( Figure 106), you
return to the Main page ( Figure 107) and the editor bar appears at the top of the
page.
ADJUST ATTRIBUTES
SET
EDITOR
DEVICE
128
PAGE
SETUP
PASSWORD
PASSWORD
AUTO POWER UP
ASSIGN PAGE
SET
SERIAL
PROTECTED TYPE
SETUP 1988
EXIT
CALIBRATE
PAGE
TRACKING
LCD TIMER
MESSAGE
Color Active-Matrix LCD Mini-Touch Panels
EXIT
EDITOR
BUTTON
BUTTON