Send File - AMX Color Active-Matrix LCD Instruction Manual

Figure 157
memory blocks message
Figure 158
Used memory blocks message
Note
The send file step is not
required if the mini-touch panel
is connected directly to the
AXCESS Control System.
Figure 159
Drawing layout decision box
Figure 160
Transfer type decision box
Color Active-Matrix LCD Mini-Touch Panels
THE NUMBER OF AVAILABLE
MEMORY BLOCKS 3198
TOUCH SCREEN TO CONTINUE
Press the screen again to open the memory blocks used message box shown in
Figure 158. This message shows the number of used memory blocks.
THE NUMBER OF MEMORY BLOCKS
USED BY USER 88
TOUCH SCREEN TO CONTINUE

Send file

Press the SEND FILE option to open the decision box shown in Figure 159. You can
send files to a PC using the AXlink or 4-pin header on the UniMount or rack-mount
mini-touch panels. The target PC must be running the TPDOC or TPDesign software
program before you send the mini-touch panel drawings. Refer to TPDOC or
TPDesign instruction manuals for more information.
DO YOU WANT TO SEND
YES
THE DRAWING LAYOUT
FILE WITH THE SYSTEM ?
YES Sends the drawing file to the PC and opens the decision box in
Figure 160.
NO Cancels the drawing file transfer and opens the decision box in
Figure 160.
PRESS YES FOR BUS
YES TRANSFER. PRESS NO
FOR RS232 (9 PIN D).
NO
NO
Mini-Touch Panel Program Reference 105