Status Indicator Light Description; Printer Modes; Idle Mode: Green - Microcom 424 Operator's Manual

Chapter 3
3.4.2 Status Indicator Light
Light Color
Solid Green
Solid Red
Solid Amber
Flashing Red
Flashing Amber

3.5 Printer Modes

The printer has four primary modes of operation. The different types of modes have an
impact on how the Print Button and the Status Indicator Light operate. This section is
intended to provide the user with an explanation of these different modes.
3.5.1

Idle Mode: GREEN

The printer is in the IDLE Mode when it is not printing and/or has no pending activity. The
indicator light is GREEN, which indicates that the printer is ready to receive label formats
and/or commands.
In IDLE Mode the Print Button has several different functions:
a) Pressing the button quickly will reprint the last label
b) If the printer was just turned ON and no formats were sent to the
c) Holding the button depressed: Form Feed labels until the button is
224/424 Operator's Manual - 880027-1000
Indicates that the power is on and the printer is in a ready state.
Indicates an error has occurred. The printer will remain in this
state until the condition is removed. If an unexplained error
persists, contact your Service Representative.
The printer is in the Tag/Tear or Peel-and-Dispense mode and is
waiting for the label/tag to be taken.
OR
Indicates that the printer is in the Boot Loader mode (MCB) and is
not running the printer application program.
A cutter error has occurred.
OR
A memory download operation was not successful.
OR
Power Spike or low voltage on the AC line. (The printer will
remain in this mode until the condition is removed and the printer
power is cycled.)
Printer is PAUSED,
Table 3-3

Status Indicator Light Description

printer, pressing quickly will print the power-up label,
released.
Description
Getting Started
3-7