Table 3-2 Print Button Description; Table 3-3 Status Indicator Light Description - Microcom 428T Operator's Manual

Chapter 3
3.12.1 Print Button
Operation
Printing a label
Pause printing
Feeding labels
(Line feed)
3.12.2 Status Indicator Light
Light Color
Solid Green
Solid Red
Solid Amber
Flashing Red
Flashing Amber
428T Operator's Manual - 880037-0141
Press the Print Button while the printer is IDLE or PAUSED to
reprint the last label.
A power up label will print after a power ON cycle when the Print
Button is pressed.
Press & hold the Print Button while the printer is printing to enter
the PAUSED mode.
Press the Print Button again to continue printing.
Press & hold the Print Button while the printer is IDLE to advance
label media. The printer will continue advancing label media until
the Print Button is released.
Table 3-2 Print Button Description
Indicates that the power is on and the printer is in a ready state.
Indicates an error has occurred. The printer will remain in this
state until the condition is removed. If an unexplained error
persists, contact your Service Representative.
The printer is in the Tag/Tear or Peel-and-Dispense mode and is
waiting for the label/tag to be taken.
OR
Indicates that the printer is in the Boot Loader mode (MCB) and is
not running the printer application program.
A cutter error has occurred.
OR
A memory download operation was not successful.
OR
Power Spike or low voltage on the AC line. (The printer will
remain in this mode until the condition is removed and the printer
power is cycled.)
Printer is PAUSED,
Table 3-3 Status Indicator Light Description
Description
Description
Getting Started
3-37