Microcom 424 Operator's Manual page 86

Printer Commands
How to Save a Label FORMAT to FLASH:
1) Create the FORMAT file with ^Axx^D130 at the top to tell the printer
2) Send the file to the printer using a standard communications
Sample format saved to RAM slot #1:
Send file using standard communications program.
^A ^D COMMAND
XX 131 Delete a FORMAT from FLASH.
^A0 deletes all FORMAT files in FLASH ^Axx deletes the FORMAT file stored
in FLASH slot (1 – 128).
This command deletes the Label FORMAT stored in Slot #xx of the FORMAT
storage bank in FLASH memory. Use this command to clear a FORMAT slot
in FLASH before storing a new FORMAT into the slot.
XX 134 Delete a GRAPHIC from FLASH.
^A0 deletes all GRAPHIC files in FLASH
^Axx deletes the GRAPHIC stored in FLASH Slot #xx
Valid values for Axx are A1 ⇒ A255. The user selects the CGN #xx that will
be cleared.
Hint: After the GRAPHIC file has been deleted, the ^D119 command may be used
to verify that Slot #xx is now available in FLASH. The GRAPHIC may extend
over several slots and the ^D119 will indicate how many slots are used by the
GRAPHIC.
xxyy 135 Save FONTS to FLASH. (See Chapter 7)
This command is not normally seen by the user. It is put into a FONT file by
the FONT converter program which generates a special ^Axxyy^D135 code
which is placed at the beginning of the FONT download file. The ^Axxyy tells
the printer the overall size of the file according to this format:
xx = the number of additional 64KB sectors in the FONT file set
yy = CGN # (1-255)
If xx = 00, then the FONT fits into one 64Kbyte sector of memory and there
are no additional sectors required for the FONT.
5-38
to store into FLASH Slot #xx,
program.
^A1^D130
^D57
1,1280,900,20,40,7,0,1,405,0,0
1,640,650,12,1,5,0,4,2,2,,,,,0
^D56
^D2
Saved Format
^D3
^[
224/424 Operator's Manual - 880027-1000
Chapter 5