Status Indicator Light Description - Microcom 438 Operator's Manual

Getting Started
Front Panel
and LED
(Status Light)
Figure 3-6
3.6.2 Status Indicator Light
Light Color
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Flashing Red
3-30
Print Button and Status Indicator Light
Indicates that the power is on and the printer is in a ready state.
Indicates that the communication port has detected activity.
The printer is in the Tag/Tear or Peel-and-Dispense mode and is
waiting for the label/tag to be taken.
OR
Indicates that the printer is in the Boot Loader mode (MCB) and is
not running the printer application program.
Printer is out of paper
Indicates an error has occurred. The printer will remain in this
state until the condition is removed. If an unexplained error
persists, contact your Service Representative.
Table 3-3

Status Indicator Light Description

Description
438 Operator's Manual - 880052-0103
Chapter 3