Typical Printer Accessories; Unpacking And Inspection; Connecting The Printer; Chapter 3: Getting Started - Microcom 424 Operator's Manual

Chapter 3: Getting Started

3.1 Unpacking and Inspection

The printer has been packaged in protective foam to help reduce the damage during
shipment. Inspect the shipping container(s) for signs of damage. If damage is evident,
contact the shipping company immediately to file a damage claim.
After the printer is removed from the container(s), verify that all the items on the packing list
are present and in good condition. The picture below (See Figure 3-1) shows a 424 printer,
operator's manual, and optional power cord. Your shipment may contain different items.
The foam and shipping container(s) should be kept and used if the printer is to be shipped
at a later time. Additional shipping materials can be ordered by contacting the Microcom
Corporation Service Department.
Figure 3-1

Typical Printer Accessories

3.2 Connecting the Printer

The printer's may be interfaced to PC's, mini-computers, main frames, and special purpose
machines using the available communications ports described in the following sections.
224/424 Operator's Manual - 880027-1000 3-1