23E-11-4
Dowel pin
E
Mitsubishi Motors Corporation
V5A51 -
DISASSEMBLY SERVICE POINT
AA" SOLENOID VALVE REMOVAL
Before removing the solenoid valves, make marks with white
paint, etc., so that these valves can be reinstalled in the
original positions.
ASSEMBLY SERVICE POINTS
"AA SOLENOID VALVE INSTALLATION
1. Apply ATF, petrolatum jelly or Vaseline to O-rings, and
2. Following the marks made during removal, install each
"BA DOWEL PIN INSTALLATION
6 mm
Install the dowel pin at the specified position on the lower
valve body.
"CA KNOCK BUSHING INSTALLATION
Install the knock bushing onto the lower valve body position
shown in the illustration.
9 mm
Mar. 2000
Valve Body
install them to solenoid valves.
solenoid valve.
PWEE8920-I
Added