Mitsubishi V5A51 Manual page 51

Second brake
A
MB991632
MD998913
MB991632
Moving amount mm
1.2 or more - less than 1.4
1.4 or more - less than 1.6
1.6 or more - less than 1.8
1.8 or more - less than 2.0
2.0 or more - less than 2.2
2.2 or more - less than 2.4
2.4 or more - less than 2.6
2.6 or more - less than 2.8
MD998913
MB991632
E
Mitsubishi Motors Corporation
V5A51 -
Snap ring
Return
spring
Moving
amount
Pressure plate
Thickness mm
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
A
Mar. 2000
Transmission
(7) Next, install the special tool instead of the pressure
plate for the second brake. Install the four brake discs
and three brake plates.
Caution
D Take care to the shape and assembly direction
of the brake plates installed at section "A"
shown in the illustration.
(8) Install the return spring, second brake and snap ring.
(9) Install a dial gauge onto special tool (MD998913)
so that the end contacts the special tool (MB991632).
Move special tool (MB991632) and measure the
moving amount.
Select a pressure plate with a thickness that
corresponds to the measured moving amount from
the following table.
End play standard value (reference):
1.49 - 1.95 mm
ID Symbol
F
E
D
C
B
A
0
1
(10)Remove the snap ring, second brake, return spring
and special tool installed in step (8).
(11)Install the pressure plate selected in step (9), and
install the return spring, second brake and snap ring
again.
(12)Install a dial gauge onto special tool (MD998913)
so that the end contacts the special tool (MB991632).
Move special tool (MB991632) and measure the
moving amount.
Select a pressure plate with a thickness that
corresponds to the measured moving amount from
the following table.
End play standard value (reference):
1.65 - 2.11 mm
PWEE8920-I
23E-5-25
Part No.
MR336390
MR336391
MR336392
MR336393
MR336394
MR336395
MR336396
MR336397
Added