Table of Contents
Advertisement
A
Rounded edge
"W"
stamp
Reaction
plate
Clutch discs
MD998924
MB991629
Snap ring
End play
Reaction
plate
E
Mitsubishi Motors Corporation
V5A51 -
"DA CLUTCH PLATE / CLUTCH DISC / REACTION
B
1. Alternately assemble the clutch plates and clutch discs
2. Install the reaction plate so that it is oriented as shown
Clutch plates
"EA SNAP RING INSTALLATION
1. Install the snap ring in the groove of the underdrive clutch
2. Set the special tools as shown in the illustration, and
3. Confirm that the clearance between the snap ring and
Mar. 2000
Underdrive Clutch
PLATE INSTALLATION
in the underdrive clutch retainer.
When assembling the four clutch plates, align the seciton
having no teeth (A in the illustration) with the underdrive
clutch retainer hole (B in the illustration).
in the illustration.
Assemble in the same manner as the clutch plate so
that the section with no teeth ("A" in the illustration)
matches the retainer hole ("B" in the illustration).
retainer.
compress the clutch element.
reaction plate (underdrive clutch end play) is the standard
value. If the clearance is not at the standard value, select
a suitable snap ring and adjust so that the clearance
is within the standard value.
Standard value: 1.6 - 1.8 mm
PWEE8920-I
23E-10-3
Added
Hide quick links:
Advertisement
Table of Contents
