Assembly - Mitsubishi V5A51 Manual

23E-5-16
Output shaft
support
E
Mitsubishi Motors Corporation
V5A51 -

ASSEMBLY

Caution
D
D
D
D
D
D
D
1. Install a new gasket and output shaft support.
2. Tighten the eight output shaft support mounting bolts
Mar. 2000
Transmission
Never reuse the gasket, O-ring, oil seal, etc. Always
replace with a new one when reassembling.
Never use grease other than blue petrolatum jelly
and white Vaseline.
Apply ATF to friction components, rotating parts, and
sliding parts before installation. Immerse a new clutch
disc or brake disc in ATF for at least two hours before
assembling them.
Never apply sealant or adhesive to gaskets.
When replacing a bushing, replace the assembly
which it belongs to.
During the work, always use bare hands or vinyl
gloves. Do not use cotton gloves. Use nylon cloth
or paper towels when necessary. Do not use shop
towel.
Change the oil in the cooler system.
Caution
D
Never reuse a gasket.
to the specified torque.
PWEE8920-I Added