23E-9-2
MD998924
O-ring
MD998924
E
Mitsubishi Motors Corporation
V5A51 -
DISASSEMBLY SERVICE POINT
MB991630
AA" SNAP RING REMOVAL
1. Set the special tools as shown in the illustration so that
Snap
ring
2. Screw in the special tool nut, and lightly press against
3. Remove the snap ring.
ASSEMBLY SERVICE POINTS
"AA D-RING INSTALLATION
1. Apply ATF to the D-ring.
2. Install the D-ring in the groove on the outer and inner
"BA O-RING INSTALLATION
Install the O-ring onto the center support at the position shown
in the illustration.
"CA SNAP RING INSTALLATION
MB991630
1. Set the special tools as shown in the illustration.
2. Screw in the special tool nut, and lightly press against
Snap
ring
3. Install the snap ring.
Mar. 2000
Center Support
they are pressed against the inner race of the one-way
clutch.
the inner race of the one-way clutch.
periphery of the piston. Make sure that the D-ring is not
twisted or damaged when installing.
the inner race of the one-way clutch.
PWEE8920-I
Added