"Ba Return Spring Installation - Mitsubishi V5A51 Manual

23E-10-2
Disassembly steps
"EA 1. Snap ring
"DA 2. Reaction plate
"DA 3. Clutch disc
"DA 4. Clutch plate
AA" "CA 5. Snap ring
6. Snap retainer
"AA 7. D-ring
MD998924
Snap ring
MD998924
Snap ring
E
Mitsubishi Motors Corporation
V5A51 -
Underdrive Clutch
DISASSEMBLY SERVICE POINT
MD998907
AA" SNAP RING REMOVAL
1. Set the special tools as shown in the illustration.
2. Compress the return spring, and remove the snap ring.
ASSEMBLY SERVICE POINTS
"AA D-RING INSTALLATION
1. Apply ATF to the D-ring.
2. Install the D-ring in the groove of the underdrive clutch

"BA RETURN SPRING INSTALLATION

Align the two return spring holes with the two projections
on the underdrive clutch piston, and then assemble the return
springs.
"CA SNAP RING INSTALLATION
MD998907
1. Set the special tools as shown in the illustration.
2. Compress the return spring, and install the snap ring.
Mar. 2000
"BA 8. Return spring
9. Underdrive clutch piston
"AA 10. D-ring
"AA 11. D-ring
"AA 12. D-ring
13. Underdrive clutch retainer
retainer and spring retainer. Make sure that the D-ring
is not twisted or damaged when installing.
PWEE8920-I Added