Aa" Snap Ring Removal; "Aa D-Ring Installation; "Ba Snap Ring Installation; "Ca Clutch Plate/Clutch Disc/Reaction Plate Installation - Mitsubishi V5A51 Manual

23E-13-2
MB991630
MB991630
A
Clutch plates
Rounded edge
Clutch discs
E
Mitsubishi Motors Corporation
V5A51 -
DISASSEMBLY SERVICE POINT
MD998924

AA" SNAP RING REMOVAL

1. Set the special tools as shown in the illustration.
2. Compress the return spring, and remove the snap ring.
Snap ring
ASSEMBLY SERVICE POINTS

"AA D-RING INSTALLATION

1. Apply ATF to the D-ring.
2. Install the D-ring in the direct clutch piston and spring

"BA SNAP RING INSTALLATION

MD998924
1. Set the special tools as shown in the illustration.
2. Compress the return spring, and install the snap ring.
Snap ring
"CA CLUTCH PLATE / CLUTCH DISC / REACTION
B
1. Alternately assemble the clutch plates and clutch discs
2. Install the reaction plate so that it is oriented as shown
Reaction
plate
"R"
stamp
Mar. 2000
Direct Clutch
retainer groove. Make sure that the D-ring is not twisted
or damaged when installing.
PLATE INSTALLATION
in the reverse clutch retainer. Align the section having
no teeth of the clutch plates (A in the illustration) with
the reverse clutch retainer hole (B in the illustration).
in the illustration. Assemble in the same manner as the
clutch plate so that the section with no teeth (A in the
illustration) matches the retainer hole (B in the illustration).
PWEE8920-I Added