Mitsubishi V5A51 Manual page 45

E
Mitsubishi Motors Corporation
V5A51 -
Thrust bearing
No.13
Direct clutch
retainer
Thrust bearing
No.13
Mar. 2000
Transmission
5. Install the thrust bearing No.13 onto the direct clutch
retainer.
Caution
D Take care not to mistake the thrust bearing No.13
mounting direction.
6. Install the direct clutch.
Caution
D
Take care that the reduction brake band does not
come off the anchor plug and the hole for the
reduction brake piston adjusting rod.
7. Install the reduction brake spring.
8. Screw the reduction brake piston adjusting rod into the
reduction brake piston manually to the full.
9. Install new seal ring on the piston.
PWEE8920-I
23E-5-19
Added