22B-4-4
MANUAL TRANSMISSION (E - W) -
Sealing cap
Snap ring
5th-reverse
speed shift
fork
3rd-4th speed
shift rail
Output shaft
E
Mitsubishi Motors Corporation
DISASSEMBLY SERVICE POINTS
AA" SEALING CAP REMOVAL
Drive a screwdriver into the sealing cap at the center, then
pry off the sealing cap with the screwdriver.
AB" TRANSMISSION CASE REMOVAL
Expand the snap ring to remove it from the snap ring groove
of the ball bearing.
NOTE
Expansion of the snap ring causes the snap ring groove to
get out of position because of the output shaft's own weight.
AC" 3RD-4TH SPEED SHIFT RAIL / 3RD-4TH SPEED
3rd-4th speed
shift fork
(1) Shift the 3rd-4th speed shift fork and 5th-reverse speed
(2) Slide the 3rd-4th speed shift rail and 5th-reverse speed
5th-reverse
speed shift rail
AD" INPUT SHAFT / OUTPUT SHAFT REMOVAL
Input shaft
Remove the input and output shafts together.
Jun. 1998
Transmission <F5M42, W5M42>
SHIFT FORK / 5TH-REVERSE SPEED SHIFT RAIL
/ 5TH-REVERSE SPEED SHIFT FORK REMOVAL
shift fork in the direction shown.
shift rail in the direction shown and remove them together
with the shift fork.
PWEE9508-E
Revised