Table of Contents
Advertisement
23E-6-4
MB991789
End play
E
Mitsubishi Motors Corporation
V5A51 -
Reverse and Overdrive Clutch
"HA SNAP RING INSTALLATION
MD998924
1. Install the snap ring in the reverse clutch retainer groove.
2. Set the special tools as shown in the illustration, and
3. Check that the clearance between the snap ring and
Mar. 2000
compress the clutch element.
reaction plate (reverse clutch end play) is the standard
value.
If the clearance is not at the standard value, select a
suitable snap ring and adjust so that the clearance is
within the standard value.
Standard value: 1.5 - 1.7 mm
PWEE8920-I
Added
Hide quick links:
Advertisement
Table of Contents
