Mitsubishi V5A51 Manual page 48

23E-5-22
Thrust
bearing No.9
Direct annulus
gear
Thrust race No.8
E
Mitsubishi Motors Corporation
V5A51 -
17. Install the direct annulus gear.
18. Apply Vaseline or petrolatum jelly to the thrust bearing
19. Apply Vaseline or blue petrolatum jelly on the thrust race
20. Install the center support.
Mar. 2000
Transmission
Caution
D Confirm that the thrust bearing No.10 in the direct
annulus gear is still at the specified location.
No.9, and then install on the direct annulus gear.
Caution
D Take care not to mistake the thrust bearing No.9
mounting direction.
No.8 removed, and then install it on the rear side of the
center support.
Caution
D Measure and record the thickness of the thrust
race No.8 before assembling.
Caution
D Install the center support so that the oil hole shown
in the illustration faces the lower side of the
transmission case.
D Use care that the thrust race No.8 attached to
the rear side of the center support does not fall
off.
PWEE8920-I Added