Direct Annulus Gear; "Aa Thrust Bearing No. 11 Installation; 12-1 - Mitsubishi V5A51 Manual

12. DIRECT ANNULUS GEAR

DISASSEMBLY AND ASSEMBLY
Apply automatic
transmission fluid to
all moving parts
before installation.
1
Disassembly steps
1. Snap ring
2. Output flange
"BA 3. Thrust bearing No.10
4. Underdrive clutch hub
Thrust bearing No.11
E
Mitsubishi Motors Corporation
V5A51 -
4
2
3
ASSEMBLY SERVICE POINTS
"AA THRUST BEARING NO.11 INSTALLATION
Apply vaseline or petrolatum jelly on the thrust bearing No.11,
and then install on the underdrive clutch.
Caution
D
Mar. 2000
Direct Annulus Gear
5
"AA 5. Thrust bearing No.11
Take care not to mistake the thrust bearing No.11
mounting direction.
PWEE8920-I
7
6
6. Underdrive clutch
7. Direct annulus gear
23E-12-1
Added