Mitsubishi V5A51 Manual page 34

23E-5-8
Oil temperature
sensor
O-rings
Snap ring
Oil seals
Oil strainer
4 3 2
E
Mitsubishi Motors Corporation
V5A51 -
9. Remove the twenty valve body mounting bolts and then
10. Remove the snap ring and disconnect the solenoid valve
11. Remove the oil strainer and two oil seals.
12. Remove each accumulator piston, seal ring and spring.
No.
1
2
3
4
5
1
6
Mar. 2000
Transmission
remove the valve body, three O-rings and oil temperature
sensor.
NOTE
The twenty valve body mounting bolts are plated bolts.
NOTE
The O-rings are mounted on the transmission case side
as shown in the illustration. However there may be cases
where they will come off with the valve body.
harness.
Remove the snap ring, then remove the accumulator
cover, O-ring and spring.
Name
For overdrive clutch
For second brake
For low/reverse brake
For underdrive clutch
For reduction brake
For direct clutch
PWEE8920-I Added