"Ha Snap Ring Installation; "Ia Steel Ball/Spacer Installation - Mitsubishi V5A51 Manual

E
Mitsubishi Motors Corporation
V5A51 -
2. Face the notched portion of the input gear in the illustrated
3. Apply sealant to the illustrated position of the transfer
4. While making sure that the notched portion of the input

"HA SNAP RING INSTALLATION

Select a proper snap ring so that the end play of the differential
lock hub will have the standard value, and install it on the
transfer drive shaft.
Standard value: 0 - 0.08 mm
"IA STEEL BALL / SPACER INSTALLATION
Steel ball
Install the steel ball in the illustrated position of the transfer
drive shaft and install the spacer with its oil groove toward
the chain cover.
Mar. 2000
Transfer
direction (in the direction of the countershaft gear bearing
hole).
case.
Specified sealant:
MITSUBISHI genuine sealant part No. MD997740
or equivalent
Caution
D Squeeze sealant out evenly to make sure that it
is not broken or excessively supplied.
gear positioned in Step 2 is in alignment with the gear
portion of the countershaft, install the transfer case plate.
Caution
D If the sub gear does not readily come in mesh
with the countershaft gear, rotate the transfer drive
shaft, etc. to securely engage it.
PWEE8920-I
23E-15-7
Added