"Da Snap Ring Installation - Mitsubishi V5A51 Manual

Snap ring
Snap ring
Standard value
Reaction
plate
E
Mitsubishi Motors Corporation
V5A51 -

"DA SNAP RING INSTALLATION

1. Install the snap ring in the direct clutch retainer groove.
2. Press the entire periphery of the reaction plate with a
Mar. 2000
Direct Clutch
force of 49 N, and confirm that the clearance between
the snap ring and reaction plate (direct clutch end play)
is the standard value. If the clearance is not at the standard
value, select a suitable snap ring and adjust so that the
clearance is within the standard value.
Standard value: 1.0 - 1.2 mm
PWEE8920-I
23E-13-3
Added