Mitsubishi V5A51 Manual page 104

23E-19-2
E
Mitsubishi Motors Corporation
V5A51 -
Rear Output Shaft
"BA SNAP RING INSTALLATION
1. Install the thickest snap ring that can be fitted in the
2. Make sure that the rear output shaft bearing end play
"CA SNAP RING INSTALLATION
1. Install the thickest snap ring that can be fitted in the
2. Make sure that the annulus gear end play meets the
Mar. 2000
snap ring groove of the rear output shaft.
meets the standard value.
Standard value: 0 - 0.08 mm
snap ring groove of the annulus gear.
standard value.
Standard value: 0 - 0.08 mm
PWEE8920-I Added