Thrust Plate Stopper Installation; Needle Roller Bearing - Mitsubishi F5M41 Manual

MANUAL TRANSMISSION (E - W) -
Thrust plate stopper
Thrust plate
MD998801
Snap ring
E
Mitsubishi Motors Corporation
"JA THRUST PLATE STOPPER INSTALLATION
When the thrust plate is installed, make sure that it is not
tilted.
"KA BALL BEARING INSTALLATION
MD998812
Use the special tools to install the ball bearing.
MD998818
"LA SNAP RING INSTALLATION
Select and install a snap ring so that the input shaft rear
bearing end play will have the standard value.
Standard value:
INSPECTION
INPUT SHAFT
(1) Check the outside diameter of the needle bearing mounting
(2) Check the splines for damage and wear.

NEEDLE ROLLER BEARING

(1) Check to ensure that when the input shaft and gear are
Jun. 1998
Input Shaft <F5M42, W5M42>
- 0.01 - 0.12 mm
portion for damage, abnormal wear and seizure.
combined and made to rotate, they rotate smoothly without
looseness and noise.
PWEE9508-E
22B-6-5
Revised