Inter-Tel Attendant Console User Manual page 82

STATUS
BUTTON
NGT:OFF
NGT:ON
NGT:*
66
When all nodes are in day mode, the night mode area displays
"NGT:OFF."
When all nodes are in night mode, the status area turns red and
"NGT:ON" is displayed.
Continued on the next page.
If some nodes are in night mode and some are not, the status area
turns yellow and the "NGT: *" is displayed.
You can double-click the night mode status area to view the current
night mode status of each node, as show below.
If you are an Administrator, you can turn the Night Mode On and Off
from this screen by clicking the Night On or Night Off button.
You can also right click the status area to display a menu that will allow
you to turn on night mode, turn off night mode, view the current night
mode status, and configure how night mode is enabled and disabled,
as shown below. (Selecting Configure will display the Night Mode
option page, shown on
NOTE:
The night mode status is based on how the user has night
mode configured, not necessarily all the nodes the Console is commu-
nicating with. Only an Administrator can turn the Night Mode on and
off.
DESCRIPTIONS
page 19.)
Inter-Tel
®
Attendant Console User Guide