Set Dnd; Set Forward - Inter-Tel Attendant Console User Manual

Set DND

You can place any station in the directory in do-not-disturb mode.
1. Highlight the desired entry in the Directory.
2. Click Set DND. The screen, shown
on the right, appears.
3. The drop-down list box contains the
list of programmed do-not-disturb
messages for your telephone system.
Select the desired message by scroll-
ing through the list.
4. If desired, enter text in the Second
Line edit box.
5. Click OK.
NOTE:
messages (00-20), shown in the Message drop-down list box above, may vary
depending on how the DND messages were programmed in each node.

Set Forward

You can place any station in the directory in call forwarding mode.
1. Highlight the desired entry in the directory.
2. Select Set Forward. The screen,
shown on the right, appears.
3. Select the Forward type from the
scroll box. The forward options are:
Forward Off, Forward Immediate,
Forward If Busy, Forward if No
Answer, and Forward if Busy or No
Answer.
4. Type the Forward Destination in the
text box, then click OK.
NOTE:
insets the outgoing feature code. Do not include the outgoing access code in the
number.
48
The Console supports DND messages across multiple nodes. The DND
For outside number destinations, the Attendant Console automatically
®
Inter-Tel Attendant Console User Guide