Inter-Tel Attendant Console User Manual page 42

•
Log Files:
— Disk Space for Log Files (Megabytes): Specifies the amount of disk space
you want to use for log files (1-20 MB). The default setting is 5 MB. Note
that the log files are always 1 MB each. Therefore, if you choose 1 MB for
disk space, the Console will make two 500 KB files.
NOTE:
deleted until there is at least 5 MB available. If there is only one log file, the
Console will stop logging. If you enter the total log file size and that number is
more than 5% of the available disk space, a warning message will appear.
— Save Log Files: The Console automatically compresses the log files.
To save the log files:
—
To change the location:
—
26
If there is less than 5 MB of free disk space, the oldest log file will be
Click Save Log Files. The following screen appears.
Click Browse and specify the new filename and location. The file-
name letter ('A') will change based on the existing log files in the "log"
directory. For example, if ConsoleLogA'.zip already exists in "log,"
then the new file name will be ConsoleLogB.zip.
•
Create multiple zip files to fit on floppy disks: Allows you to
initially save the zip files onto your hard drive and then later be
able to transfer the zip files onto floppy disks. The default direc-
tory and base file names for spanned zipped files are the same as
for the normal zipped log files with the exception of the file
extension. The initial file name will be .zip but subsequent zip
files will contain the extensions in the form of .z02, .z03 and
so on, as shown on the next page.
®
Inter-Tel Attendant Console User Guide