Connection Tab - Inter-Tel Attendant Console User Manual

To select the desired nodes:
— Check Put selected nodes in night mode, the Node list becomes

Connection Tab

The Connection tab is used to set up communication with the telephone system. This
information must be entered correctly for the Attendant Console to work. If you do
not know the information, contact your Telephone Administrator.
•
Your Station:
— Extension: Enter your extension number.
— Node: Enter the node to which your endpoint is connected.
NOTE:
and replace your endpoint's line cord. The
WW:XX.YY.ZZ" on the second line of the LCD display. The number to the left
of the colon (WW) is the node number of your endpoint.
20
editable, as shown below. Check the desired nodes and click OK.
If you do not know which node your endpoint is connected, unplug
endpoint shows
®
Inter-Tel Attendant Console User Guide
"CKT