Inter-Tel Attendant Console User Manual page 117

•
Administrator Stations: You can program a keyset station to be an Administra-
tor station, or you can remove its Administrator status. (You cannot program this
for your own station or a single-line station.)
1. Scroll through the extension number list to locate the station you want to
program.
2. Highlight the station you wish to program and double-click on the check box
in the Administrator field.
3. Enter the extension number of the station you wish to serve as the attendant
for this station.
If you attempt to change the Administrator flag for your own station or for a
single-line station, you will see an error message.
•
Swap: This feature allows you to exchange (swap) the locations of two stations
on the same node. This is used when a station is physically relocated within the
same node and you want to update the database programming.
NOTE:
sion 6.1 or later.
1. Highlight the station you would like to swap with in the Station tab, shown
below, and click Swap. The screen, shown on the next page, appears.
®
Inter-Tel Attendant Console User Guide
The Swap feature is available on nodes that are running OAI protocol ver-
101