Inter-Tel Attendant Console User Manual page 114

Entry to the database programming feature at the Administrator stations can be pro-
tected using a password. A password would prevent unauthorized users from altering
the system database.
NOTE:
Passwords are very important to system security. Without sufficient password
protection, the System database is vulnerable to unauthorized access.
To change the password:
— Select Change Password from the Programmer drop-down menu in the Sys-
tem Programmer dialog. The following screen appears:
Enter the current password, if any, in the Old Password text box. Then enter the
new password twice: once in the New Password text box and once in the Confirm
New Password text box. These two entries must match exactly. If they do not you
will see an error message and the password will remain unchanged. The password
may contain up to eight digits and include only numbers (0-9).
NOTE:
word by entering the Program Database feature code (9932). For more details,
refer to the telephone system's Installation and Field Maintenance Manual or Adm-
nistrator's Guide.
98
You can also use your Administrator station to program a database pass-
®
Inter-Tel Attendant Console User Guide