Connection Tab - Mitel Inter-Tel User Manual

Connection Tab

The Connection tab is used to set up communication with the telephone system. This
information must be entered correctly for the Attendant Console to work. If you do
not know the information, contact your Telephone Administrator.
•
Your Station:
— Extension: Enter your extension number.
— Node: Enter the node to which your endpoint is connected.
NOTE:
and replace your endpoint's line cord. The
WW:XX.YY.ZZ" on the second line of the LCD display. The number to the left
of the colon (WW) is the node number of your endpoint.
— Station Password: Enter the station password programmed for your station.
(At default, this is your extension number.)
NOTE:
entering the Program Station Password feature code (392). For more details,
refer to the telephone system's Installation and Field Maintenance Manual.
22
If you do not know which node your endpoint is connected, unplug
You can also use your keyset to program a station password by
endpoint shows
®
Inter-Tel Attendant Console User Guide
"CKT