Mitel Inter-Tel User Manual page 37

•
Night Mode Setup:
— Put all nodes in night mode: All nodes connected to the OAI Server are put
in and out of night mode.
— Put only my node in night mode: Only the operator's node is put in and out
of night mode.
— Put selected nodes in night mode: Allows you to choose what nodes to put
in and out of night mode from a list. The list will contain all the nodes that
the Attendant Console is communicating with and their locations.
To select the desired nodes:
— Check Put selected nodes in night mode, the Node list becomes
®
Inter-Tel Attendant Console User Guide
editable, as shown below. Check the desired nodes and click OK.
21