Mitel Inter-Tel User Manual page 39

•
Reconnect: Reconnects your Attendant Console to the system.
•
OAI Server: Allows you to specify a list of OAI Servers to which the Console
can connect. When connecting, the Console will start at the top of the list and
work its way down until it finds a server that will let it connect. Because the Con-
sole always prioritizes through the server list in a top down manner, the first OAI
Server on the list is the default primary server that the Console will connect.
NOTE:
Console with the Call Processing (CP) Server (previously called Windows NT-
based CPU). The CP Server has redundancy capabilities, and by adding redun-
dancy support to the Console, it can automatically make use of the CP Server's
redundancy feature. (The CP Server has two IP addresses that belong to it. If the
primary CPU fails then the backup CPU automatically takes over, however, the
applications connected to the primary CP Server will just "hang" unless they have
provisions for connecting to the secondary CPU.)
To add OAI Servers to the OAI Server List:
You can add OAI Servers to the OAI Server list by clicking one of the following
buttons.
NOTE:
the Console cannot determine the password for the server, it prompts you to enter
the correct password. If the password you entered was incorrect, the Console asks
you if you want to add the server anyway. If you click Yes, the server will be added
to the OAI Server list. You may set the password later by clicking Edit.
— Find: Provides OAI Server information for servers on your LAN and gives
you a choice to choose OAI Servers to add to the OAI Server list. The avail-
able servers will appear in the screen, as shown below. To add a server to the
OAI Server list, highlight the desired server and click Add. You can only
add one server at a time.
®
Inter-Tel Attendant Console User Guide
One of the main reasons for supporting this feature is to integrate the
Any OAI Server (except Axel Office Server) requires an OAI password. If
23