Mitel Inter-Tel User Manual page 127

Q: W
HEN DO
A: The CT Gateway is required in the following environments. Please consult the
OAI Configurator, Sales Engineering, or the CT Gateway Installation Manual
(document part no. 835.2161) for more specifics.
•
Network environment with System Level II OAI applications
•
A non-CP Server single node
•
Several System Level II OAI applications
Q: D I
O NEED THE
C
ARD
5600 (I
A: Yes. In order for the Console or any System Level II OAI application to receive
information from a node, the OAI stream must be sent in a TCP/IP format across
the LAN/WAN. Note that the CPC and CP Server in the Axxess system and the
CS-5200/5400/5600 in the Inter-Tel 5000 system requires the CT Gateway to
unify the OAI streams from multiple nodes.
Q: W
HAT APPLICATIONS CAN RESIDE ON THE SAME
G
ATEWAY ON A
A: The CP Server or CS-5200/5400/5600 should never house any other software
(i.e., CT Gateway, Voice Mail, etc.). You may however, load the CT Gateway
and Switch Transceiver software on the same PC. Minimum specifications are:
•
Switch Transceiver: Win 98/Me/NT/2000, Pentium II, 300MHz or higher,
64 MB RAM, CD-ROM, NIC, etc. (Highly recommend Windows NT/2000
over Windows 98 also highly recommend a Control RocketPort card, see the
Switch Transceiver installation manual for details)
•
CT Gateway: Windows NT/2000, Pentium III, 400 MHz or higher, 128 MB
RAM, CD-ROM, NIC, etc. (Windows NT/2000 only)
•
Attendant Console: Windows 2000/XP/Vista, Pentium II, 200 MHz or
higher, 32 MB RAM, CD-ROM, NIC, etc.
Q: Q: D
O
APPLICATIONS
A: No. The Multi-App CT Gateway is able to communicate with an infinite number
of CTI applications.
®
Inter-Tel Attendant Console User Guide
I CT G
NEED THE ATEWAY
S T
WITCH RANSCEIVER
(A ), CP S
XXESS ONLY
-T 5000 )
NTER EL ONLY
CP S
ERVER OR
I CT G
NEED MULTIPLE
?
?
(A
XXESS ONLY
(A
ERVER XXESS ONLY
ON EVERY NODE IN A NETWORK ENVIRONMENT
PC? C
CS-5200/5400/5600?
ATEWAYS TO CONNECT TO MULTIPLE
), C P
ALL ROCESSING
) CS-5200/5400/
OR A
?
I CT
AN PUT THE
CTI
111