Ct Gateway; Tcp/Ip Connections; Software Security Key - Mitel Inter-Tel User Manual

CT Gateway

The Attendant Console provides call handling for either a single system or multi-node
system network. In order to support a multi-node system network, the Attendant Con-
sole must have a TCP/IP connection to a CT Gateway that supports a multi-node net-
work.
The CT Gateway coordinates events and commands from all connected sources,
allowing you to access and control devices on multiple system systems.
Refer to the system's Installation and Maintenance Manual for more information on
the CT Gateway.

TCP/IP Connections

TCP/IP provides diagnostic and connectivity tools for connecting to other systems
and to a network. For TCP/IP to work on your computer, it must be configured with
IP addresses, subnet masks, and a default gateway for each network adapter on the
computer. To determine if TCP/IP is installed on your computer, check with your
Network Administrator.

Software Security Key

The software "key" is a small security device that must be attached to your PC's par-
allel port or USB port to fully enable the Attendant Console software. Without the
key, the software will only work in "demo" mode. The software key does not affect
the functionality of the parallel or USB port itself. Any device that you would nor-
mally connect to the parallel port can also be connected through the software key.
To install the software key, simply shut down Windows, turn off the power switch on
your PC, and attach the appropriate end of the device to the parallel port or USB port
on the back of your PC.
6 ®
Inter-Tel Attendant Console User Guide