Mitel Inter-Tel User Manual page 135

ERROR POSSIBLE PROBLEM
Network is The Attendant Console cannot
Unreachable communicate with the OAI
Server computer.
Network Sub- See "Network Subsystem is
system is Not Unavailable".
Initialized
Network Sub- Windows cannot fulfill commu-
system is nication requirements of Atten-
Unavailable dant Console because the
underlying system is currently
unavailable
No Buffer This indicates a shortage of
Space Avail- resources
able
No Route to See "Network is Unreachable"
Host
Ports The
Exceeded unable to connect to the OAI
Server at this time because the
server is already communicat-
ing with the maximum number
of client applications.
®
Inter-Tel Attendant Console User Guide
Attendant Console is
FIX
Verify the OAI Server IP address. To do so,
select Options from the Console drop-down
menu. On the Connection tab, select the OAI
Server and click Edit.
If the OAI Server computer is running and the
Attendant Console knows the correct IP
address, contact your Network Administrator.
You might try the following:
•
Ping the destination host to see if you get
the same results (chances are, you will).
•
Check whether you have a router config-
ured in your network system (your Win-
Sock implementation).
•
Do a traceroute to try to determine where
the failure occurs along the route between
your host and the destination host.
Verify that networking and TCP/IP is correctly
and fully installed on the Attendant Console
computer. You might need to reinstall network-
ing, TCP/IP, or Windows to correct this problem.
This can occur if you are running too many
applications simultaneously. If this tends to
occur after running certain applications, it may
be a symptom of a malfunctioning application.
This error can also indicate that you are not
closing applications properly. If the error per-
sists, restart the Attendant Console computer.
Avoid running the offending application.
119