Snmp Traps - Meinberg LANTIME/GPS Operating Instructions Manual

SNMP Traps

If configured, the LANTIME is sending SNMP traps, which can be received by up
to 2 SNMP management systems. These traps can be received by using the NET-
SNMP suite tool "snmptrapd", you can start it on a UNIX system with "snmptrapd –
p" (-p is for output to stdout, -s would use the syslog for output). The corresponding
MIB files can be found on the LANTIME at /usr/local/share/snmp/mibs/ , all
Meinberg specific MIB files are named "MBG-SNMP...." . These MIB files can be
downloaded by using the web interface (see "Local" page, "Download MIB files"
button), after unpacking the archive file you can import the MIB files into your
management system.
The following SNMP-traps are available:
"NTP not sync"
"NTP stopped"
"Server boot"
"Receiver not responding"
"Receiver not sync"
"Antenna faulty"
"Antenna reconnect"
"Config changed"
„Leap second announced"
See the "Notification" page at the web interface and Command Line Interface
description to learn how to configure the SNMP trap receivers.
NTP not synchronised to refclock
NTP stopped
System has rebooted
no answer from GPS
GPS receiver not synchronised
GPS antenna not connected
GPS antenna reconnected
System parameter changed by user
Leap second announced
99