Advertisement
Quick Links
LANTIME M600/GPS: High End NTP Time Server with integrated GPS radio
clock
[1] The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any
size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio
clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences
or a temporary loss of reception. The standard M600 model already offers a broad range of interfaces and
can be customized to meet the special requirements of your application.
Important note
Produktgruppe
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface [2]
utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP,
SYSLOG, SNMP
- Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
- Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap
messages
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Antenna connected with up to 300m of standard coaxial cable RG58
- Four independant RJ-45 ethernet interfaces 10/100 MBit
rev 2013.0704.1631
and console based graphical configuration
(Demo)
Page 1/6
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
http://www.meinberg.de
info@meinberg.de
lantime-m600-gps
Advertisement
Related Manuals for Meinberg LANTIME M600/GPS
Summary of Contents for Meinberg LANTIME M600/GPS
-
Page 1: Key Features
LANTIME M600/GPS: High End NTP Time Server with integrated GPS radio clock [1] The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. - Page 2 Description The GNU/Linux operating system of the LANTIMEs SBC (Single Board Computer) has been optimized to ensure a high level of security and reliability. A large VF display shows the state of the internal GPS receiver and the NTP subsystem. Three LEDs (green/red) indicate the status of the three main components: Reference Time (GPS), Time Synchronization Service (NTP) and Network (Link status).
- Page 3 Data formats: 7N2, 7E1, 7E2, 7O1, 8E1, 8N1, 8O1 Time strings: [5] Meinberg Standard-Telegram , SAT, Uni Erlangen (NTP), SPA, RACAL, Sysplex, NMEA0183 (RMC, GGA, ZDA), Meinberg GPS, COMPUTIME, ION oder [6] Capture-Telegramm Unmodulated time code DCLS, TTL into 50 Ohm via female BNC connector, active high...
- Page 4 Ports - backup and restore configuration files - copy security keys - lock/unlock front keys Supported Time String Meinberg Standard Timestring, Uni Erlangen Timestring, SYSPLEX Timer, NMEA, Formats Computime, ABB-SPA, SAT, Arbiter Single-Board-Computer i386 compatible 500Mhz CPU, 128 MB RAM Operating System of the Linux with nano kernel (incl.
- Page 5 Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product. RoHS-Status of the product This product is fully RoHS compliant WEEE status of the product This product is handled as a B2B category product.
- Page 6 Links: [1] http://www.meinberg.de/english/products/ [2] http://www.meinberg.de/cgi-bin/main.cgi [3] http://www.meinbergglobal.com/english/products/gps-antenna-converter.htm [4] http://www.meinberg.de/english/products/specs/gpsopt.htm [5] http://www.meinberg.de/english/specs/timestr.htm [6] http://www.meinberg.de/english/specs/capstr.htm [7] http://www.meinberg.de/english/products/gps-antenna-converter.htm [8] http://www.meinberg.de/english/products/ [9] http://www.meinberg.de/english/products/ntp-time-server.htm [10] http://www.meinberg.de/download/docs/manuals/english/m600_gps.pdf rev 2013.0704.1631 Page 6/6 lantime-m600-gps...