Password; Http Access Control - Meinberg LANTIME/GPS Operating Instructions Manual

Password

On the ""Security"" page you can manage all security relevant parameters for your
timeserver. In the first section "Login" the administration password can be changed,
which is used for SSH, TELNET, FTP, HTTP and HTTPS access. The password is
stored encrypted on the internal flash disk and can only be reset to the default value
"timeserver" by a "factory reset", changing all settings back to the factory defaults.
Please refer to the LCD configuration section in this manual.

HTTP Access Control

With this function you can restrict the access to the web interface and allow only a
few hosts to login. Only the hosts you entered in the list are able to login to the
HTTP/HTTPS server of your LANTIME.
If a non-allowed host tries to login, the following message appears:
50