Meinberg LANTIME/GPS Operating Instructions Manual page 97

SNMP branch
mbgLtCfgNtpServer3KEY
mbgLtCfgStratumLocalClock
mbgLtCfgNTPTrustedKey
mbgLtCfgNTPBroadcastIP
mbgLtCfgNTPBroadcastKey
mbgLtCfgNTPBroadcastAutokey
mbgLtCfgAutokeyFeature
mbgLtCfgAtomPPS
mbgLtCfgEMail mbgLtCfgEMailTo
mbgLtCfgEMailFrom
mbgLtCfgEMailSmarthost
mbgLtCfgSNMP mbgLtCfgSNMPTrapReceiver1
mbgLtCfgSNMPTrapReceiver1Commu
nity
mbgLtCfgSNMPTrapReceiver2
mbgLtCfgSNMPTrapReceiver2Commu
nity
mbgLtCfgSNMPROCommunity
mbgLtCfgSNMPRWCommunity
mbgLtCfgSNMPContact
mbgLtCfgSNMPLocation
mbgLtCfgWinpopup mbgLtCfgWMailAddress1
mbgLtCfgWMailAddress2
mbgLtCfgWalldisplay mbgLtCfgVP100Display1IP
mbgLtCfgVP100Display1SN
mbgLtCfgVP100Display2IP
mbgLtCfgVP100Display2SN
Variable
integer
integer(0..15)
integer
string (IPv4 or IPv6-
address)
integer
integer (0 =
disabled, 1 =
enabled)
integer (0 =
disabled, 1 =
enabled)
integer (0 =
disabled, 1 =
enabled)
string (Liste von
EMail-addressn)
string (EMail-
address)
string (IPv4 or IPv6-
address or
hostname)
string (IPv4 or IPv6-
address or
hostname)
string
string (IPv4 or IPv6-
address or
hostname)
string
string
string
string
string
string
string
string (IPv4 or IPv6-
address or
hostname)
string (Hexstring)
string (IPv4 or IPv6-
address or
hostname)
string (Hexstring)
97
Data type
Link to the key which should be used
for the third NTP-server
Stratum-value of the internal system
clock of the timeserver
Link to the key which should be used
for the internal reference time source
IP-address, which has to be used for
NTP-broadcasts (or multicasts)
Link to the key which should be used
for outgoing NTP-broadcasts
Use autokey for NTP broadcasts?
Use autokey feature of the NTP server?
Atom PPS (pulse per second) activated?
One or more (semicolon separated)
email address(es). which should receive
warnings and alarm notifications from
the timeserver
The EMail-address which is used as the
senders address for email notifcations
The SMTP-host, which is used for
sending mails
First host, which receives notifications
sent as SMTP-traps
The SNMP community used when
sending SNMP-Traps to the first host
Second host, which receives
notifications sent as SMTP-traps
The SNMP community used when
sending SNMP-Traps to the second host
The SNMP community, which has read-
only access and therefore can be used to
only monitor status variables or
configuration values (SNMP V2c)
The SNMP community, which has read-
write access and there for can be used to
monitor status variables and get/set
configuration values (SNMP V2c)
Contact information (e.g. name of a
contact person) of the timeserver
Location (e.g. building/room number) of
the timeserver
First receiver of notifications sent as
windows popup messages
Second receiver of notifications sent as
windows popup messages
hostname or IP-address of the first
wallmount display used for showing
notifications
The serial number of the first wall
mount display used for showing
notifications (can be found in the setup
menu of the display)
hostname or IP-address of the second
wall mount display used for showing
notifications
The serial number of the first wall
mount display used for showing
notifications (can be found in the setup
menu of the display)
Description