Menu Sv Position; Menu Setup - Meinberg LANTIME/GPS Operating Instructions Manual

Menu SV POSITION

This menu gives information on the currently selected satellite (SV). The satellite's
ID number, its elevation, azimuth and distance from the receiver position reflect the
satellite's position in the sky whereas the Doppler shows whether the satellite is
coming up from the horizon (Doppler positive) or going down to the horizon
(Doppler negative). All satellites in view can be monitored by using the NEXT key.
SATELLITE 4 INFO:
Dist:

Menu SETUP

From this menu, several topics can be selected which let the user edit parameters or
force special modes of operation. A specific topic can be selected using the NEXT
key. Depending on the current topic, pressing the CLR/ACK key either enters edit
mode with the selected set of parameters or switches to the selected mode of
operation (after the user has acknowledged his decision). Once edit mode has been
entered, the NEXT key lets the cursor move to the digit or letter to be edited whereas
the INC key increments the digit or letter under the cursor. If changes have been
made, the CLR/ACK key must be pressed. If all changes have been made in one setup
submenu you have to press the MENU key. After that you will be asked to save the
settings. Press INC to change and save the last changes. Otherwise all changes are
discarded when the user presses the MENU key in order to return to the SETUP
display.
SETUP:
El: 17°
24000 km Dopp:
LAN PARAMETERS
27
AZ: 204°
-3.550 kHz