Setup Irig Settings (Option) - Meinberg LANTIME/GPS Operating Instructions Manual

SETUP IRIG SETTINGS (option)

This menu lets the user select the Timecodes to be generated by GPS167-TC. Most
IRIG-Codes do not carry any time zone information, hence UTC is selected for output
by default. If desired, the clocks local time can be output by selecting "TIME:
LOCAL".
SETUP:
CODE: B002+B122
TIME: UTC
The timecode IEEE1344 has a so called TFOM (time figure of merit) segment that
carries an information on the synchronization state of the radioclock.
Whenever the selected timcode carries TFOM, it can be blanked by selecting "disable
TFOM", This feature can be helpful for testing when the connected IRIG-reader
evaluates TFOM.
CODE: IEEE1344
TIME: UTC
Refer to chapter Timecode for details.
IRIG SETTINGS
ENABLE TFOM
32