Technical Specifications Gps167 - Meinberg LANTIME/GPS Operating Instructions Manual

Technical Specifications GPS167

RECEIVER:
ANTENNA:
ANTENNA
INPUT:
LC DISPLAY:
TIME TO SYN-
CHRONIZATION:
PULSE
OUTPUTS:
ACCURACY OF
PULSES:
FREQUENCY
OUTPUTS:
SERIAL PORTS:
POWER
REQUIREMENTS: 5 V ± 5 %, @ 700 mA
PHYSICAL
DIMENSION:
REAR EDGE
CONNECTOR:
RF CONNECTOR:
AMBIENT
TEMPERATURE:
HUMIDITY:
6 channel C/A code receiver with external antenna/converter unit
Antenna/converter unit with remote power supply refer to chapter
"Technical Specifications GPS167 Antenna"
Antenna circuit dc-insulated; dielectric strength: 1000 V
Length of cable: refer to chapter "Mounting the Antenna"
1HE: 2 x 40 character, menu selectable by push buttons and light
BGT: 4 x 16 Zeichen, menu selectable by push buttons
One minute with known receiver position and valid almanac
12 minutes if invalid battery buffered memory
Change of second (P_SEC, TTL level)
Change of minute (P_MIN, TTL level)
Better than ±250 nsec after synchronization and 20 minutes of
operation
Better than ±2 µsec during the first 20 minutes of operation
10 MHz (TTL level)
3 asynchronous serial ports (RS-232)
COM0: fixed, internal used
COM1: fixed, internal used
COM2+3: configurable, sending Standard Meinberg
Time String (once per second or per minute)
Eurocard, 100 mm x 160 mm
According to DIN 41612, type C 64, rows a+c (male)
Coaxial SMB connector (male)
0 ... 50 °C
85 % max.
106