The Menus In Detail; Root Menu - Meinberg LANTIME/GPS Operating Instructions Manual

The menus in Detail

Root Menu

The root menu is shown when the receiver has completed initialisation after power-
up. The left side of the first line of the display shows the receiver's mode of operation
as described above. The text "NORMAL OPERATION" might be replaced by
"COLD BOOT", "WARM BOOT" or "UPDATE ALMANAC". If the antenna is
disconnected or not working properly, the text "ANTENNA FAULTY" is displayed
instead.
GPS: NORMAL OPERATION
NTP: Offset GPS: -1ms
On the right side of the display the current date, the name of the time zone (as defined
in the setup menu) and local time are monitored. If the "IGNORE LOCK" option is
enabled an "*" will be shown behind the time.
If the NEXT key is pressed from the root menu a submenu is displayed showing the
receiver's software revision of the LANTIME software and the GPS167 flash
software:
LANTIME:4.05
GPS167 :4.02
If the NEXT key is pressed twice from the root menu a submenu is displayed showing
the NTP software version, the operating system version and the MAC address of the
integrated net card.
Pressing NEXT the third time the fingerprint of the SSH key is displayed:
1024 b2:a7:95:c1:fa:eb:de:9a:92:05:33:e4
:47:68:eb:91
Pressing NEXT the fourth time the receiver info is displayed:
RECEIVER INFO:
SYNTH:
S/N:000000000000
S/N:9008890
NTP:4.0.99f OS:2.2.14.06
HWaddr: 00:00:00:00:00:00
LanGpsV4
n/a
Wed, 18.11.2002
MEZ 10:04:10
PROUT: 0 NCOM: 2
TCXO_LQ gps167_3
25