Parking A Call; Retrieving A Parked Call - Siemens HIPATH 3000 Operating Instructions Manual

Calling Multiple Parties Simultaneously
Step by Step
Transfer?
Program/Service
* 56=Park a call?
Program/Service
Retrieve call?
36
I
Replace the handset.
or
Select and confirm.

Parking a Call

You can park up to ten calls, either internal, external, or
b oth. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Precondition: You are conducting a call.
Press the key. The LED lights up.
Select and confirm.
or
F>?
Enter the code.
9 B
... Enter the number of the p ark slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
p layed, it is already in use; enter another one.

Retrieving a Parked Call

Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
G>?
Enter the code.
9 B
... Enter the park slot number you noted earlier.
If the p ark slot number you enter is not in use, you can-
not retrieve the call.
If the connection between the two other parties
is not established within 45 seconds, the call
from the first p art returns to you (recall).
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).