Download  Print this page

Call Waiting (camp-on) - Siemens HIPATH 3000 Operating Instructions Manual

Hipath allserve hicom 150 e/h.
Hide thumbs


Step by Step
US: E xit?
UK: E nd?
Program/S ervice
S peaker
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
Press the key. The LED goes out.
Press the key. The LED goes out.

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called part y.
Wait (approx. 5 seconds) until "Camp -on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond Æ page 15
The called party can prevent automatic call
waiting Æ page 16.
If this feature is configured (contact System Sup-
port), you will hear the ring tone and the mes-
sage "Camp-on" is immediately displayed.
If You Cannot Reach a Destination ...


   Related Manuals for Siemens HIPATH 3000

Comments to this Manuals

Symbols: 0
Latest comments: